Check light beam for proper height aiming: a. The top of the low beam pattern should align 2” below line B. b. The high beam of light should be directed straight ahead. Properly adjusted headlights project a concentrated beam of light and should center on line B. High beam adjustment is illustrated below. Adjust headlight aiming if necessary. 2012 Hyundai Genesis Coupe with HID Xenon headlights6 inch flathead screwdriverClockwise to adjust upwards, counter-clockwise to adjust downwardsPerform at y Properly adjusted headlights project an equal area of light to right and left of center. 7. Adjust headlight aiming if necessary. WARNING A motorcycle’s automatic-on headlight feature provides increased visibility of the rider to other motorists. Poor visibility of the rider to other motorists can result in serious injury or even death. Motorcycling. Buying Guides. Maintenance & Repair. Learn the importance of proper headlight alignment, the tools needed, step-by-step instructions, and common mistakes to avoid. Enhance your ride's safety today. Needing to adjust the headlight beam pattern on your Jeep JK/JKU? It's super easy, follow along with Tech Tim.All you need is a flat parking space, a wall th Locate the vertical adjuster on each headlamp, then use a P2 Philips screwdriver to turn the. adjuster either counterclockwise (to adjust down) or clockwise (to adjust up) aligning the upper edge of the light pattern up to the horizontal line. 6. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NON-ADJUSTABLE. When adjusting the height of the light projected by the headlights, you need to make sure to concentrate the majority of the light at or below the 36 inch horizontal line. Cover one headlight and adjust its height by turning the adjustment screw left or right. Once done, cover that light and move on to the other side. Properly aimed headlights provide better illumination of the road without causing glare for oncoming drivers. To adjust your LED projector headlights, you will need a few tools and supplies, including a tape measure, a screwdriver or hex wrench, a flat wall or garage door, and a level surface at least 25 feet away from the wall or door. Vay Tiền Nhanh Chỉ Cần Cmnd Asideway.

how to properly adjust headlights