2) Both front and rear sensors are connected to PSM_MZ module located behind glove box right side. You should check first that you have this module and the harness to it is full. 3) You need new indicator unit with parking sensor button. From your description, normally all the parking sensors do not fail at the same time it is likely to be a fault in the wiring to the sensors or a fault with the module. Check F4 5A Parking aid module fuse, here is a link to the fuse box diagram to help you locate the fuse. 12. Name: Ted. Ford Model: C Max Titanium. Ford Year: 2010. UK/Ireland Location: Hampshire. Posted July 29, 2023. Hi all, Got a 2010 Titanium with some defects I'm looking to fix. First one is the parking sensors, which come up with the 3 second fault alarm and flashing light when put into reverse. AUTOSPARK. Maybe one of the sensors is faulty. Switch the ignition on, select reverse gear, then go to the back of the car and lightly rub a finger back & forth over the face of each sensor. You should be able to feel them pulsing. The one that isn't is the one that is faulty. 2. Verify Park Assist Blocked See Owners Manual message is not displayed on DIC. ⇒ If Park Assist Blocked See Owners Manual message is displayed, refer to Parking Assist System Malfunction. 3. Observe the scan tool Park Assist Switch parameter while pressing and releasing the park assist disable switch. The parking aid module carries out self-check routines and when the parking aid is active, checks the parking aid sensor wiring for short or open circuits. If a concern is detected, a diagnostic trouble code (DTC) is stored in a memory in the parking aid module and the front and rear parking aid sensors will be disabled until the DTC is cleared The parking aid module does this by calculating the distance to an object by the use of four parking aid sensors mounted in the rear bumper. The sensors can detect objects approximately 1m to the rear of the vehicle. An intermittent warning tone is generated from the speaker in the parking aid speaker, located on the central junction box (CJB). Thanks for the help! Way to go. Now GO treat yourself !! 2004 - 2008 Ford F150 - Park Assist Module Location - I'm getting ready to upgrade my truck with a factory Park Assist System. My Control Module will be in by this weekend. I'm looking to see if anyone knows where it's supposed to be located before I start ripping my dash apart to mount it. Vay Nhanh Fast Money.

ford c max parking sensor module location