If your PS4 controller isn’t working as expected with Steam, you might find third-party software helpful. DS4Windows is a popular choice and a great way to customize your controller settings. It can even fix issues like no sound. Plus, it’s easy to download and use. Give it a try and see if it helps your gaming experience. How to Connect PS4 Controller. Method 1: connect a wired controller to PS4 with USB cable. Turn on the PS4 console. Insert another end of the controller into the USB port on your PS4. Press the PS button on the center of the controller and hold it for 3 seconds. Method 2: connect a wireless controller to PS4 with USB cable. Turn on the PS4 console. The PS4 driver, like any other driver, might become corrupt or outdated, resulting in system failure. The PS4 controller is recognized as a device when connected to the computer. To do so, follow the below steps and fix PS4 controller blinking white issue. Note: To do so, you need to connect your controller to the PC using a USB cable or This can help to reset the connection and get your controller working again. Another option is to resolve Bluetooth connection problems with your PS4 controller. This can involve turning off other Bluetooth devices in the area or resetting the Bluetooth connection on your controller. Finally, make sure that both devices are paired correctly. Make sure to turn ON your console and plug in the USB cable into your VR controller. Keep it charged for a few hours and then check for the issue again. You can hold the PS button on the controller and open the Quick Menu to see the battery life of the controller. 2. Check the PS Camera Connection to the PS4. To restart your PS4 in Safe Mode, you can follow these steps: Turn your PS4 off. Hold the power button for 10 seconds until you hear two beeps. Plug your PS4 controller into the console with a USB cord. Restart the controller by pressing the PS button. If it is an issue with the software, Safe Mode should fix the red light. Connect your controller to the console using a usb cable. On the ps4 home screen, navigate to “settings” using the controller. Select “devices” and then choose “controllers.”. From the available options, select “update firmware.”. Follow the on-screen prompts to begin the firmware update process. Follow this method to reset your PS4 controller. Have a safety pin or a sim ejector tool handy with you. Look for the top right screw at the rear of the controller. You will see a small hole that says reset. Now take the pin or sim tool and gently press the reset button for a few seconds. App Vay Tiền Nhanh.

how to fix ps4 controller not connecting to ps4