Here are some of the most common warning signs of a bad timing belt on the Mitsubishi Outlander: 1. Engine Won’t Start. If your Outlander’s timing chain or belt has fallen off completely, broken, or has jumped a few teeth, it is entirely possible that the engine won’t even start. You might hear it slapping around (broken timing belt or I am considering buying a mitsubishi 2011 outlander (petrol 2.4 4 cyl, petrol 3.0 V6) or ASX (petrol 4cyl 2.0L). Can u please tell me how reliable the engines and transmissions (incl CVT and standard … read more After a lengthy investigation and a bunch more dead Outlander Sport engines, Mitsubishi is recalling more than 75,000 examples to ensure that no more cases occur. It was more than a year before a Range for the 2021 Mitsubishi Outlander PHEV. The 2021 Mitsubishi Outlander PHEV has slight upgrades in range and power over last year’s model. It now has 24 miles of electric-only range, rather than 22 miles. Plus, it has a bit more horsepower (31 hp more). A new 2.4-liter four-cylinder engine now generates 126 hp and 148 lb-ft of torque. Topic. My brother has a 2000 Mitsubishi Galant with a 2.4L. The previous owner adjusted the idle. I am aware that it is not suppose to be adjusted. It is throwing a P0505 code now and idles around 1000 and 500 with ac on. I marked the adjustment and turned a 1 turn, it idled up then I adjusted it 2 turns opposite direction and It idled down. 1. Disconnect the fuel injectors from their harness connectors . NOTE: To identify which cylinder the fuel injector belongs to, see the above illustration with the cylinder # id for the 2.4L engine. 2. Set your multimeter to Ohms (Ω) mode and: Measure the resistance of the fuel injector across its two male spade terminals with the multimeter For 2021, the Outlander only comes as a plug-in hybrid that has been updated to a 2.4-liter four cylinder engine with an upgraded electric motor that provides a combined output of 221-hp. There are three ways that it can cause P0014: Low Oil: The most common cause of P0014 is low oil. The oil level needs to be low enough to lower the engine’s oil pressure (dangerously low). If oil flow slows down enough to throw the p0014 code, It’s likely low enough to lock up the engine. Vay Tiền Trả Góp Theo Tháng Chỉ Cần Cmnd.

mitsubishi outlander 2.4 engine problems